5 Tips to Tell if There’s Mold in Your Attic

When a home shows signs of mold growing within it, the problem can become severe quickly; however, this is made worse if the mold begins to grow in the attic. Mold in the attic may cause numerous health hazards, including respiratory complications and allergies. It may also harm the structural integrity of your house and lower its value.

If you suspect mold in your home’s attic, it is very important for you to act fast. Inch by Inch Inspections is a professional company that can assist homeowners with mold inspections in Toronto and mold remediation in Toronto. Below are five tips on how you can identify mold growths in your home’s attic and address them accordingly through this article. Read on!

Tip 1: Look for Visible Signs of Mold

5 Tips to Tell if There’s Mold in Your AtticOne way to identify if mold is growing in your attic is to visually check the area. Different types of mold have varying colors and textures, such as black, green, white, or gray. They can feel gross or slimy but most often appear powdery. Insulation wood and drywall are some usual spots where molds may develop within attics.

If you see any signs of mold, it’s important that you act immediately. To assess the situation thoroughly, Inch by Inch Inspections offers mold inspection services in Toronto, which will enable them to determine how bad things have gone and what needs to be done.

Tip 2: Check for Musty Odors

The attic may contain another sign of mold growth: a musty smell. Mold gives off a strong and unpleasant smell. If you detect any musty odors coming from your attic area, do not take things lightly. This could mean that mold is growing in the property.

To detect where the smell is coming from, use your nose. Walk through the room while smelling around until you get to the area with the heaviest aroma. Once you identify the area of growth, it is important to investigate how bad things really are so that appropriate action can be taken afterward; for example, hiring experts like Inch by Inch Inspections who deal with mold inspection and remediation professionally.

Tip 3: Inspect for Water Damage

One thing that causes mold to grow in the attic is water damage. Leakage in the roof, window, or door can allow water into the attic, as can plumbing leaks or condensation. 

To identify if you're experiencing any water damage problems, homeowners should look for staining, discoloration, or warping signs on their attic surfaces. Again, they must check out their ceilings and walls, too, because these areas may also have some water stains. Where necessary, immediate action has to be taken so as not to give mold another chance of infesting a home with its spores, which could be dangerous if inhaled.

Tip 4: Monitor the Humidity Levels

To make it harder for mold to grow, the attic should have low humidity. Mold thrives well in an environment where the humidity level is above 60%. You can measure the moisture content in your loft space using a hygrometer. The tool will give you a true picture of how humid it is inside your attic.

Ventilating the attic properly can help keep moisture levels down, hence avoiding mold growth. Additionally, you may need to use a dehumidifier if necessary. Inch by Inch Inspections will provide expert advice if you are uncertain about monitoring or controlling the humidity levels in your attic.

Tip 5: Consider a Professional Inspection

If mold growth is suspected in your attic, it is important to contact a professional mold inspector. A professional inspection will determine the extent of the problem, advise on the best course of action, and give expert guidance on how to prevent future mold growth.

Inch by Inch Inspections is a respected mold inspection and remediation company serving Toronto. Our specialists use advanced equipment and techniques to detect and address mold growth in your attic. We put your safety and health first and respond promptly and effectively until your mold problem is resolved.

Types of Mold to Look Out For

  • Cladosporium: One of the most common molds indoors or outdoors and can lead to breathing problems and allergies.
  • Aspergillus: This kind of mold usually grows in wet places. It may cause respiratory infections, allergic reactions, or inflammation of the lungs.
  • Stachybotrys: Referred to as “black mold” which thrives well in environments with a lot of moisture content; this mold variant could lead to serious health issues such as respiratory problems, tiredness, and sometimes even depression.
  • Penicillium: Grows in buildings where water damage has occurred, causing respiratory infections or allergy attacks in people who come into contact with the affected areas.
  • Alternaria: This mold is often found in bathrooms or any other wet place, which makes people who are allergic to it suffer more from asthma since their attacks can easily be triggered.
  • Fusarium: It is mostly located within soil as well as structures like houses which have been attacked severely by floods leading not only to eye irritations but also respiratory tract infections among different individuals living around these places.

Identifying and Addressing Attic Mold Growth with Inch by Inch Inspections

Attic mold growth is a significant concern that can result in a wide range of health and structural problems. If you suspect that you have attic mold growth, it’s important to act quickly. By following the five tips we’ve listed in this post, you will be able to detect and solve attic mold growth.

When it comes to mold inspection and remediation in the Toronto area, Inch by Inch Inspections has you covered. We possess all the expertise and experience needed to swiftly and effectively detect and address any mold growth within your attic space. Call us today to book your mold inspection and remediation services!

Call now!

Schedule Your Inspection Today. FREE Estimates Available

Call Now: 416-568-9702

Please, enter a valid value

Inch by Inch Inspections



Please, enter a valid value